Roof Top

Rooftop is elliptical polyurethane hybrid material paste for sealing and whitening roofs smear or spray. The material creates an opaque white membrane that seals the surface from moisture and humidity, plus bleach the surface and thus helps to lower the heat load in the building.

How to use

Surface preparation

Before you start Ensure proper roof slopes towards receptors

Clean the surface impurities such as dust, leaves, sand, share overlapping fragments of concrete and more ...

, In order to enable adhesion (adhesion) good sealant.

It is advisable to wash the roof with water and Lnkzm to clean the roof well.

Primer \ Established

Rooftop may be diluted with water at a ratio of 1: 1 and apply a quantity of 250 g \ m².

You can use the seasons in the Premier "Akrilbond" founded connects to the existing infrastructure in a quantity of 250 grams

\ Sqm.

Wait two hours to dry primer to be "dry to the touch."

Application instructions

Mix well the material in the bucket about 2 minutes before using a uniform texture.

You can apply Rooftop spraying machine, roller, paint brush and squeegee, and more.

After dehydration foundation layer, to be applied in an even layer of about 2.5 to 2 kg \ sqm.

Wait for a dry layer of about 6 hours, depending on temperature and ambient weather conditions

After drying the layer, he put another layer of 2-2.5 kg Rooftop \ sqm.

Laundering roofing with bitumen sheets should apply only one layer of 2-2.5 kg \ sqm.

Products "Decor polymers" Israel exclusively marketed by the company "Decor - Art"

Adress: Pinhas Lavon 6/2, Petah Tikva, ISRAEL. V.A.T: 060 174 018

Tel. Yossi - 050-9006734 | Amiram - 050-739116

Email. [email protected] | [email protected]

www.Decorats.co.il

You can use the armor glass network Rooftop places where surfaces are designed to crack.

Highlights application

Do not apply Rooftop windy weather and rain

Do not apply Rooftop roofs with poor drainage and slopes

Not suitable for sealing the flower under the flooring in bathrooms

Rooftop be applied only when the temperature of the environment is higher than 5 W C

The objective test can be performed \ flooding after 10 days of completing the application

Precautions • Do not swallow

Use personal protective equipment before you begin working with the Rooftop

Wash hands and equipment with soap and water immediately after finishing work

Specifications

Shape - white cream Hlkhtzfifot- 1.45 g / ml

Motzkim-% 07

Lcisoi- recommended amount of 2-2.5 kg / M"raobi dry layer - 2-3 M"mtmfrtort application - over ° C5

Heat resistance - up to ASTM D 2939 140 ° C Origin- flexibility to ASTM D 522 15 ° C strength Bmtihh- 1.5 MPa 412ASTM D Htarcot- to 054% 412ASTM D stand, water resistance and high resistance 2939ASTM water pressure resistance D - 0.5 atm, 24 hours 52123DIN UV radiation resistance - resistant

Products "Decor polymers" Israel exclusively marketed by the company "Decor - Art"

Adress: Pinhas Lavon 6/2, Petah Tikva, ISRAEL. V.A.T: 060 174 018

Tel. Yossi - 050-9006734 | Amiram - 050-739116

Email. [email protected] | [email protected]