SINOFLOC anionic flocculants are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our flocculant anionic polyacrylamide is available in anionic polyacrylamide powder and emulsion forms.

Anionic Polyacrylamide (PAM) Specifications:

Products Product Code Anionic Charge Molecular Weight

Anionic PAM Powder SINOFLOC 9012 Slightly Medium

Anionic PAM Powder SINOFLOC 9014 Slightly High

Anionic PAM Powder SINOFLOC 9116 Low High

Anionic PAM Powder SINOFLOC 9118 Low Very High

Anionic PAM Powder SINOFLOC 9218 Medium High

Anionic PAM Powder SINOFLOC 9219 Medium High

Anionic PAM Powder SINOFLOC 9220 Medium Very High

Anionic PAM Powder SINOFLOC 9224 Medium Ultra High

Anionic PAM Powder SINOFLOC 9226 Medium Ultra High

Anionic PAM Powder SINOFLOC 9318 Medium High

Anionic PAM Powder SINOFLOC 9320 Medium Very High

Anionic PAM Powder SINOFLOC 9326 Medium Ultra High

Anionic PAM Powder SINOFLOC 9418 Medium High

Anionic PAM Powder SINOFLOC 9426 Medium Ultra High

Anionic  PAM Powder SINOFLOC 9518 Strongly High

Anionic PAM Powder SINOFLOC 9526 Strongly Ultra High

Anionic PAM Emulsion SINOFLOC 932 Medium Very High

Powder anionic polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.

Anion Polyacrylamide Feeding:

The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration of anionic polyacrylamide polymer is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.

SINOFLOC as one of the most professional anionic polyacrylamide manufacturers in China. We offer polyacrylamide flocculant water treatment, concrete additives for curing, anionic polyacrylamide flocculant, oilfield chemicals, etc. Contact us to buy anionic polyacrylamide or know more.