SINOFLOC polyacrylamide cationic flocculant are co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our polyacrylamide cationic polymer is available in solid powder and emulsion forms.

Cationic Polyacrylamide (PAM)Specifications

Products Product Code Cationic Charge Molecular Weight

Cationic PAM Powder SINOFLOC 605 Slightly High

Cationic PAM Powder SINOFLOC 606 Slightly Very High

Cationic PAM Powder SINOFLOC 610 Low High

Cationic PAM Powder SINOFLOC 611 Low Very High

Cationic PAM Powder SINOFLOC 615 Low High

Cationic PAM Powder SINOFLOC 616 Low Very High

Cationic PAM Powder SINOFLOC 620 Low/Medium High

Cationic PAM Powder SINOFLOC 621 Low/Medium Very High

Cationic PAM Powder SINOFLOC 625 Low/Medium High

Cationic PAM Powder SINOFLOC 626 Low/Medium Very High

Cationic PAM Powder SINOFLOC 630 Medium High

Cationic PAM Powder SINOFLOC 631 Medium Very High

Cationic PAM Powder SINOFLOC 635 Medium High

Cationic PAM Powder SINOFLOC 636 Medium Very High

Cationic PAM Powder SINOFLOC 640 Medium High

Cationic PAM Powder SINOFLOC 641 Medium Very High

Cationic PAM Powder SINOFLOC 645 Medium High

Cationic PAM Powder SINOFLOC 646 Medium Very High

Cationic PAM Powder SINOFLOC 650 Medium High

Cationic PAM Powder SINOFLOC 651 Medium Very High

Cationic PAM Powder SINOFLOC 655 Medium/Strongly High

Cationic PAM Powder SINOFLOC 656 Medium/Strongly Very High

Cationic PAM Powder SINOFLOC 660 Medium/Strongly High

Cationic PAM Powder SINOFLOC 661 Medium/Strongly Very High

Cationic PAM Powder SINOFLOC 665 Medium/Strongly High

Cationic PAM Powder SINOFLOC 666 Medium/Strongly Very High

Cationic PAM Powder SINOFLOC 670 Strongly High

Cationic PAM Powder SINOFLOC 671 Strongly Very High

Cationic PAM Powder SINOFLOC 680 Very Strongly High

Cationic PAM Powder SINOFLOC 681 Very Strongly Very High

Cationic PAM Powder SINOFLOC 690 Very Strongly High

Cationic PAM Emulsion SINOFLOC 1209 Low High

Cationic PAM Emulsion SINOFLOC 1409 Medium High

Cationic PAM Emulsion SINOFLOC 1509 Medium/Strongly High

Cationic PAM Emulsion SINOFLOC 1809 Very Strongly High

Products Feeding:

The polyacrylamide is a synthetic cationic polymerization flocculants and polymer flocculant powder. It is mainly related to chain length and the charge of the dewatering performance of polyacrylamide excessive dosage. The positive charge on the ion polyacrylamide adsorption, due to electrostatic repulsion, it will reduce the sludge settling performance. Therefore, we should pay attention to investment in overtime to calculate in advance the proper dosage. The solutions of SINOFLOC cationic polyacrylamide for chemical applications must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC cationic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes for the coagulation of water. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific polyacrylamide applications on cationic polymer, please consult with SINOFLOC team.