Where are rubber chokes used?

Cylindrical rubber chokes are used on vibrating tables of concrete block moulding machine to ensure the direct movement of pallets for this machine. Helps to decrease noise and vibration on the tables. Produced with or without holes, bolts or without them. In the production of these parts, ordinary rubber is used. Production varies depending on demand, NBR (nitrile), EPDM (ethylene propylene rubber), CR (neoprene) and other suitable types of rubber.

Cylindrical rubber chokes are used on vibrating tables of concrete block moulding machine to ensure the direct movement of pallets for this machine.

Trolleys are used in countries with available labor to move finished concrete products to drying areas.

Wheels for trolleys

Trolleys are used in countries with available labor to move finished concrete products to drying areas. Rubber wheels are used for reliable transportation of products. Wheel size 3.50 – 8 (4 RR)- 4-8 (4 RR) may vary depending on the machine model.

Brushes for cleaning moulds.

The size of the brush is changed according to the models of concrete blocks making machine. The mould models that use our brushes, which are 50 cm to 150 cm high and 10 cm high, are used for cleaning concrete paver and block moulds, and the 20 cm high mould cleaning brushes are used in machine for the production of concrete curbs. The task of the brushes is to clean the remaining morter. These components are high-strength cleaning brushes, which are produced using a 3 mm DKP sheet pressed on the sides, U-shaped using a 6 mm steel wire.

Vibrator Bearings

The vibrator bearings that we use in our machines are supplied in accordance with the customer's request.

Vibrator Bearings

The vibrator bearings that we use in our machines are supplied in accordance with the customer's request. The vibrator bearings are manufactured with high rotation speed and heat resistance in mind.

Vibratör Engine

Type of vibrator used for compressing concrete and various materials, used in the machines for the production of concrete blocks and paving stones; Type-platform vibration motor, motor 4 x 7.5 kW and 2 x 2.2 kW - 5.5 kW and 0.44 kW, the number of vibrators depends on the machine model.

Used to compact concrete and various materials used in concrete block and paving stone production machines

Hydraulic Pistons They serve as a link between the balancing lever and the solution container in concrete blocks molding machines.

Hydraulic Pistons

They serve as a link between the balancing lever and the solution container in concrete blocks moulding machines. Hydraulic pistons move the solution hopper forward and backward. It is necessary to perform regular technical inspection of the pistons. If there is an oil leak or a malfunction that interferes with the operation of the control system, it must be repaired or replaced.

Motor Belt

Belt pulley mechanisms consist of three groups: toothed belt, flat belt, and V-belt. Our company provides customers with a belt as spare parts.

Motor Belt Belt pulley mechanisms consist of three groups: toothed belt, flat belt, and V-belt

The sensor and switches that we use in our concrete blocks moulding machines, made it easier for operators to use.

Sensor

The sensor and switches that we use in our concrete blocks moulding machines, made it easier for operators to use.

Jacking

Used for lifting and lowering the morter hopper up and down. Usage depends on the type of mould.

Whatsapp:+90 544 468 75 49

e-posta: [email protected]