Package Included

1 x Wind Turbine Generator

1 x turbine hybrid controller (which can connect to solar panel & wind generator, and it auto work with 12V 24V)

3 x Blades

1 x Nose Cone

1 x Instruction Manual

1 set Screws and Nuts

Check Instruction for the Wind-Solar Hybrid Controller Setting

UK, Germany, Australia, China Stock Usually Ships in 3 to 5 Business Days

ECO-WORTHY 400W 12V Off Grid Wind Turbine Generator System

ECO-WORTHY 's Wind Turbine is a smart choice and affordable for remote homes and cabins in windy areas. Electricity produced by wind generation can be stored in batteries for household use when needed. Wind generators can be used alone, or they may be used as part of a hybrid system, in which their output is combined with that of photovoltaics. Hybrid systems are especially useful for winter backup of home systems where cloudy weather and windy conditions occur simultaneously.

Features

1. Max daily output at 1.4KW. It also works when there is only the wind power or solar power, getting hybrid or single power.

2. High-performance Nylon fiber blades by precision molding injection

3. Low start-up/cut-in wind speed by unique electro-magnet design

4. Protect from over-speed by blade aerodynamic elasticity

5. High efficient and compact alternator With high-performance NdFeB permanent magnet

6. With small moment generator of 0.08N.M for low start wind speed

7. Overspeed protection by special electrical design and aeroelastic blade

8. Hybrid controller for wind turbine and solar panel with PWM function 12V/24V

9. Aluminum housing design for good heat sink, lightweight and tough environment

ECO-WORTHY 400W 12V Off Grid Wind Turbine Generator System

Electrical Specification

Rated Power 400w

Rated Voltage DC12-24V

Battery Voltage DC12-24V

Start-up Wind Speed 2.5m/s(8'/s)

Rated Wind Speed 10.5m/S(35'/s)

Maximum wind speed 35m/s

Rated Rotate Speed 800r/min

Battery capacity 200AH-400AH

Control system Automatic fan dedicated controller

Inverter Pure sine wave inverter

Generator style Permanent-magento-phase A.C

Fan blade quantity 3

Wind leaf material Carbon fibre composite

Rotor diameter 1.2M

Tower diameter Suggest more than 80 mm

Altitude of towe 4.5M-10M

Fan in the weight 8KG

Pole diameter Out diameter 7.4cm inner diameter 5.3cm

Packing specification 687*365*210mm(27"x14.4"x8.3")

Product Life 15 years

Warranty 1 year

Certification CE

Wind Controller Specification

Rated Voltage DC12-24V

Rated Wind Generator Capacity 400W/800W

Wind Generator Braking Voltage 14.5V/29V

Wind Generator Recover Voltage: 13.2V/26.4V

Rated Solar Power 500W/1000W

Max. Discharging Current 20A

Battery overpressure protection 16.5V/33V（Close the load output）

Battery discharge protection 10.7V/21.4V（Close the load output）

Battery discharge recovery voltage 12V/25V（Restore the load output ）

Quiescent Power Consumption 15mA

Ambient Temperature -35~+75℃

Dimensions(L x W x H): 150mm×87mm×28mm

IP Protection Level IP67

Working Prince

Working Prince

1. There is wind, the wind turbine blade in the rotation, the kinetic energy of the wind is converted into mechanical energy, the spindle rotation to generate electricity

2. The controller will produce an alternating current into direct current put in the battery, achieve the goal for electric power

3. When battery when completely filled, the controller is disconnected charging current controller to uninstall state formation, to protect the battery will not overcharge

4. Inverter (only off-grid inverter should be applied here) main function is will have a low voltage DC wind generator, and battery storage of electrical energy is converted into ac 220V / 50 Hz alternating current (AC) to meet all kinds of household appliances use

Power out put

Wiring

For the connection of the seven cable

1. Firstly, connect the positive poles of load, battery and solar panel to the red wire.

2. Next, connect the negative pole of load to the yellow wire of controller.

3. And then, connect the negative pole of the battery