• No. 7 Songshan Road, Wenxi Industrial District, Wenling City, Zhejiang Province, China
  • wenling, Zhejiang, 317527
  • চীন
  • টেলিফোন:+86(0)576 86711667
  • ফ্যাক্স: ---.---.-----
  • ইউআরএল:

Flap Wheel M8

প্রোত এবং জাল ব্যাগ

$ 10 USD / টুকরা

এক্সপ্লোর পরিচালনা

পাওয়া গেল না

পাওয়া গেল না

জিজ্ঞাসা করা

পণ্যের বিবরণ

This non-standard custom mounted emery flap wheel is M8 type, and M8 type is also divided into several types, such as M8 Straight Hole, M8 with Shank and M8 Screw Hole. As the name suggests, the 8 in M8 means the middle aperture is 8mm, and the middle of the page turning mounted flap wheels adopts imported high-quality special glue.

Grit Size

40#, 60#, 80#, 100#, 120#, 150#, 180#, 240#, 320#, 400#, 600# (dimensions smaller then 15mm starts with 80#)

Raw Material

Coated Abrasive Clothes, Silicon Carbide, Aluminium Oxide, and Ceramic combined, Zirconia, etc, with different brands, e.g. Klingspor, Sait, Deerfos, NCA, 3M, etc)

Working Principle of Flap M8 Wheel

Reducing wear and thermal load of the workpiece can be achieved by reducing contact pressure and speed (abrasive paste/oil can be used when appropriate)

In order to avoid unnecessary tool wear and thermal load,choose to switch to coarser-grit abrasive clothes instead of increasing contact pressure to increase cutting force

Increasing the cutting speed achieves a slightly finer surface.

Increasing the contact pressure makes the surface slightly more coarse and if you use the same grit size on soft or hard material the surface finish will look coarse on the softer material.