This electric servo press machine is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The electric servo mechanical press can realize six-sided position processing and front and back groove processing at a time.

TY10 series electric servo pressing machine is independently developed and designed by the professional servo press manufacturer Ningbo Tianyu Machinery Equipment Co., Ltd with independent intellectual property rights. The servo electric press machine is specially used for the pressing accessories of bearing, shaft sleeve water pump, turbocharger, gearbox, gear, chassis parts, rear axle, and bushing of the subframe shock absorber. Electric servo mechanical press has the advantages of high automation, high precision positioning, energy-saving, environmentally friendly, simple operation, convenient data storage, and traceability.

Mechanical Press Machine Working Principle

Servo electric press is called servo pressing or servo press for short. Its working principle is that the high precision ball screw is driven by the servo motor to perform the precision pressure assembly operation. It can realize the closed-loop control of pressing force and pressing depth in the pressure assembly operation to realize the precision pressing of online quality management. In addition, the equipment has the function of online detection, which can draw the real-time force-displacement curve, and avoid unqualified products. Electric servo mechanical press also has the function of audible and visual alarm, and saving and downloading the pressing data.

Electric Servo Press Machine Technical Parameters

Model TY103-10 TY103-30 TY103-50 TY103-100

Output range 3-10kN 3-30kN 5-50kN 10-100kN

Cylinder stroke 250mm 250mm 250mm 250mm

Decreasing speed 1-250mm/s 1-135mm/s 1-100mm/s 1-166mm/s

Rising spaed 1-250mm/s 1-135mm/s 1-100mm/s 1-166mm/s

Pressing speed 1-30mm/s

Displacenent oontrol procislon ±0.01mm

Measuring pracision ≤0.1%FS

Power supply single-phase AC220V50Hz three-phase AC380V 50Hz

Motor power 1.3kW 1.8kW 3kW 7.5kW

Machine weight 500kg 650kg 700kg 900kg

Power consumption of the equipment per hour ≈0.5kW/h(600per hour) ≈0.7kW(600per hour) ≈1kW/h(600per hour) ≈2kW/h(600per hour)

load in screw mobile 16.5kN 39kN 57.4kN 114kN

Product Use Of Electric Servo Press Machine

Suitable for the interference assembly of various parts assembly with the pressing force between 10-100kn, including but not limited to the accessories of precision instruments, electronics, bearing, shaft sleeves, water pump, turbocharger, gearbox, gear, automobile chassis parts, rear axle, and bushing of the subframe shock absorber. The electric servo mechanical press is mainly suitable for tooling being unable to have hard-limited pressing.

Main Functions Of Electric Servo Press Machine

Pressing mode: positioning pressing; constant pressure pressing; cycle pressing of several parts

Quality control: peak pressure detection; in-place detection; interference fit detection

Data tracking: data networking; data report; data download

Error proofing function: tooling zero-point detection; user account management

Tooling management: product bar code scanning; tooling bar code scanning; user account authority allocation

Industry Pain Points Of Electric Servo Press Machine

1. Low automation, relying on manual labor, and high error rate;

2. The pressed parts are easily deformed with large positioning errors;

3. The limited energy-saving efficiency fails to meet the requirements of the equipment in the dust-free workshop;

4. The limited quality management results in a high probability of unqualified products;

5. The complicated operation relies on the personnel's experience;

6. The simple pressing mode with low universality fails to press with constant pressure;

7. Data storage is complicated and difficult to trace.