TECON concrete formwork timber mainly includes BASE 20 Wall Formwork, Flex 20 Slab Formwork, Slab Table Formwork and BASE 20 Column Formwork.

Combining different components such as film faced plywood, steel waler, and steel prop, all above shuttering timber for concrete formwork can be assembled and used for wall, column, slab, and beam casting.

Due to the large size design, the weight of each formwork unit is also relatively high. Thus crane assistance during site transportation is a must.

Types of Timber Formwork

TECON BASE 20 Wall Formwork

TECON BASE 20 is a universal wall formwork consisted of H20 timber beam, TECON-Form plywood and steel waler and others. Those independent components can be freely assembled. Therefore, TECON BASE 20 formwork is dedicated to suiting all sizes and shapes of walls.

Features of BASE 20 Formwork

Feasible in column formwork solution.

Efficient on-site by pre-assembled big-size formwork panels under crane assistance.

Quickly achieve fair-faced concrete finishing by high-quality shuttering, few tie rods and joints.

Suitable for all size and shape requirements due to flexible arrangements of girders and walers.

Specifications of BASE 20 Formwork

1. Flexible panel widths are determined by the length of the steel waler.

2. It consisted of H20 timber beam, steel waler, TECON-Form Plywood and other accessories.

3. Flexible panel heights are determined by the H20 girder and panel strut length, up to 8m. "3.0m*3.0/3.6/4.0/6.0m;

4.0m*3.0/3.6/4.0/6.0m;

5.0m*3.0/3.6/4.0/6.0m;

6.0m*3.0/3.6/4.0/6.0m;"

4. Customized irregular shapes are determined by shaping wood and special shape steel waler.

5. Adapt to various fresh concrete pressure up to 90kN/sqm by the flexible arrangement of girder and walers.

Application of BASE 20 Formwork

Residential & commercial buildings, concrete tanks, basement, bridge abutment and piers, columns, or irregular concrete structures shape wood and others.