This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed, ground, bridge and etc.

The Advantages of SDS 35mm Length Glued Hooked End Steel Fiber

Easier operation and improve structural strength;

High toughness and lower thickness and reduce steel reinforcement requirements;

Improve impact and abrasion resistance;

Less time used, and more economical;

Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.

Steel High Performance Fibres USER'S GUIDANCE

Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber

Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.

If you are looking for a reliable steel fiber supplier, don't hesitate to contact us!