Polyurea X

General

Hybrid polyurea coating silicone elliptical

Two-component water-based

• Two-component polyurea hybrid water-based

• Hydrophobic coating has high resistance to water

• high resistance to UV outdoor conditions

• Suitable for water reservoirs and swimming pools

• Chemical resistant to solvents, oils, salts

• Used as expected upper stagnant water sealing system

• You can provide a variety of colored or transparent

• The coating is very flexible and mechanically strong

• Contains a unique blend repellent silicone enhanced

Product description

X polyurea hybrid polyurea coating is silicone-elliptical two-component water-based, strong and flexible, and has a high resistance to UV. High sealing properties against water and moisture. Suitable for various sealing systems, especially in stagnant water. A coating chemical resistance of reservoirs.

Applications

X is used for applications polyurea waterproofing paint or coating applications, transparent roofs, ponds, swimming pools, balconies, flooring, concrete walls, foundations and more …

X Polyurea can be applied in several layers and upper layers outdoor conditions such as corrosive air defense: equipment, steel containers, steel beams, galvanized metal, roofs, and walls.

Polyurea X has a high chemical resistance and sailors used a protective coating against corrosion in metals and concrete applications Marine baptism or standing water.

technical information

• Appearance \ hue – blue, red, white, transparent

• Packaging – 5,10 liters

• Lightning 60 W – matt, silk

• Thinner – Water

• The percentage of solids * – 45% ± 2% (transparent formula) *

• The temperature of storage – up to 40 ° C SW

• Shelf life – 24 months

• Time between layers – 4 hours

• Drying time – 10 hours, depending on the weather

* Formula solid percentage varied 75%

Infrastructure

The infrastructure to be clean from dirt, dust, leaves, previous coatings, salts, oil, wax and dyes. You can rinse the surface intended to implement water to clean the surface thoroughly. Best results are sensible application surface is completely dry. Exposed surfaces must be the appropriate surface preparation, and with a layer of founding \ primer suitable for use.

- Metals:

It is advisable to perform sandblasting rank Sa-2.5. If you can not perform sandblasting, there roughen the area with electrical equipment \ Mechanical suitable to clean the surface and remove loose rust to the rank of St-2. Then, should be the establishment of a suitable type layer Afoksil.

- Concrete surfaces:

• Shelf life – 24 months

• Time between layers – 4 hours

• Drying time – 10 hours, depending on the weather

* Formula solid percentage varied 75%

Infrastructure

The infrastructure to be clean from dirt, dust, leaves, previous coatings, salts, oil, wax and dyes. You can rinse the surface intended to implement water to clean the surface thoroughly. Best results are sensible application surface is completely dry. Exposed surfaces must be the appropriate surface preparation, and with a layer of founding \ primer suitable for use.

- Metals:

It is advisable to perform sandblasting rank Sa-2.5. If you can not perform sandblasting, there roughen the area with electrical equipment \ Mechanical suitable to clean the surface and remove loose rust to the rank of St-2. Then, should be the establishment of a suitable type layer Afoksil.

- Concrete surfaces:

Age concrete must be more than 28 days, and after finishing. Prepare surface and reduce loose, remove soluble salts, bumps into an arrangement Srulek, plaster and other connections must be implemented .. Established linking layer such as Akrilbond or Afoksil. .

Application

Mix Part A with Part B ratio of 1:10, while optimum workability after mixing parts is up to 12 hours.

Optimal implementation must be applied at a temperature of 10-35º W, at a temperature of over º50 W could create bubbles, liquidity and nozzle with surface paint.

Apply the paint layer control until the appropriate thi